Description:

LED Curing Light is composed mainly of high power LED, micro-control electric circuit, Li-on battery, charging base, light guide, Circular eye-protector and power adapter. Adjustable curing time and three curing modes are available.

Principle:
 
LED Curing Light is applied to ray radiation principle to solidify the light-sensitive resin by shooting at it in a short time.

Function:

Used for polymerization of light cured materials by dental professionals.

Main Technical:

Power Adapter:
Input: AC 100~240V, 50/60Hz           
Output: DC 5V, 1A                             
Charging Time: About 5 hours

Li-ion Battery:
Voltage: DC 3.7V
Capacity: 2200mAh

LED:
Outer Diameter: Ø8mm                 
Area: 50mm2
Wavelength: 450~470nm                
FAST Mode Intensity: >1000mw/cm²
RAMP Mode Intensity: >500mw/cm²
PULSE Mode: 1 second interval with full power for 1.8 seconds

Dimension:

Main Unit (Control Part): 26*40*145mm
Charging Base: 60*100*70mm

Character:

Net Weight: about  250 g
Shockproof Type: Internal power supply
Shockproof Level:B type equipment
Operational Mode: short-run general equipment.
Working Environment:
Ambient temperature: 5℃ ~ +40℃
Relative humidity range: 0% ~ 80%
Atmospheric pressure: 50KPa ~ 106KPa

Structure and Components:

1. Light Guide         
2. Circular Eye-protector
3. Power Adapter       
4. Charging Base 
5. Hand Piece           
6. LCD Panel
7. Setting Buttons       
8. Charging Indicator

Three Curing Mode:

P1：FAST Mode:full power all the time
P2：RAMP Mode:gradually increasing power then full power till ends
P3：PULSE Mode:1 second interval with full power for 1.8 second

Warranty: One Year! Service: Whole Life!